Toggle Mobile

Soffit

Metal Soffit Panels

What is Soffit Panel?

Soffit panel is a 12” wide, interlocking concealed fastener panel that you see on the overhang of a building roof, on either the eave (low end) or gable (overhang that follows the roof angle from the low side up to the peak of the roof) or both.

These panels are installed to protect the exposed rafters and purlins from weather, animals and insects. Our vented soffit panels assist with air circulation. The design of our soffit panel has integrated stiffener v-joints to reinforce the strength and durability of this streamlined panel.

In addition to the traditional installation of soffit panels on overhangs of a building, soffit is fantastic for an interior shiplap use! The concealed fastener makes it clean and minimal, and we make it in any of our colors to complement your decor.

*Certain colors may be subject to an order minimum and longer lead time. Teton Steel recommends obtaining a color chip prior to placing an order. Please contact your Teton Steel representative to learn more.



Panel Color Options

24 Gauge *Stock Colors*
Charcoal Gray (Teton)
Gotham Patina Low Gloss/Low Sheen (Teton)
Gun Metal Low Gloss/Low Sheen (Teton)
Galvalume Non-Painted (Teton)
Colonial Red (Teton)
Slate Gray (Teton)
Bonderized (Teton)
24 Gauge Special Order (takes extra time)
Aged Copper (CMG)
Almond (Drexel)
Ash Gray (CMG)
Bright White (CMG)
Burnished Slate (CMG)
Charcoal Gray (CMG)
Cityscape (CMG)
Classic Green (CMG)
Copper Penny (CMG)
Copper-Ten Raw (Sheffield)
Cor-Ten AZP Raw (Sheffield)
Deep Black (CMG)
Dove Gray
Evergreen
Galv-Ten Raw (Sheffield)
Hemlock Green (CMG)
Matte Black (CMG)
Musket Gray (CMG)
Regal Blue
Regal Red (CMG)
Royal Blue (CMG)
Silver Metallic (CMG)
Slate Blue (CMG)
Slate Gray (CMG)
Solar White (Sheffield)
Stone White (CMG)
Surrey Beige (Sheffield)
Vintage (CMG)
Weathered Zinc (CMG)
Western Rust (CMG)
26 Gauge
Zincalume (Teton)
Beige (Teton)
White (Teton)
Dark Brown (Teton)
Dark Gray (Teton)
Dark Green (Teton)
Light Gray (Teton)
Light Stone (Teton)
Medium Brown (Teton)
Weathered Copper (Teton)
Black (Teton)
26 Gauge Special Order (takes extra time)
Ash Gray (CMG)
Burnished Slate (CMG)
Charcoal Gray (CMG)
Classic Green (CMG)
Copper Penny (CMG)
Deep Black (CMG)
Dove Gray
Evergreen
Matte Black (CMG)
Musket Gray (CMG)
Pebble Clay (CMG)
Slate Blue (CMG)
Slate Gray (CMG)
29 Gauge *Stock Colors*
Zincalume (Teton)
White (Teton)
Weathered Copper (Teton)
Ivory (Teton)
Parchment (Teton)
Light Stone (Teton)
Beige (Teton)
Hickory Moss (Teton)
Desert Brown (Teton)
Medium Brown (Teton)
Dark Brown (Teton)
Light Gray (Teton)
Dark Gray (Teton)
Sky Blue (Teton)
Dark Blue (Teton)
Red (Teton)
Burgundy (Teton)
Medium Green (Teton)
Dark Green (Teton)
Forest Green (Teton)
Black (Teton)
Copper Penny (Teton)
Sedona Rust (Teton)
Bright Red (Teton)
Flat Dark Brown (Teton)
Flat Black (Teton)
Flat Dark Gray (Teton)
Flat Forest Green (Teton)

Available Gauges

24, 26, 29
* Certain colors may be subject to an order minimum and longer lead time. Please contact your Teton Steel representative to learn more.

Available Materials

Painted, Bonderized, Galvalume®, Western Rust, Galvanized G-90

Paint System

Durapon70™ PVDF, ULTRA CLAD™ Kynar500®/Hylar5000®

Warranties

Durapon70™ PVDF – 35 year
ULTRA-CLAD™ – 35 year
Zincalume® AZ50 – 20 year

Panel Characteristics
  • 12” wide coverage, ½” rib height
  • Concealed fastener
  • Lengths of 10’ or 12’ in 28/29 and 26 gauge (Teton colors only); and lengths of 10’ in 24 gauge (Teton and CMG colors only)
Fastener Application
  • Soffit panel can be applied over a solid substrate or over open purlins (Maximum free span is 24”)
  • Not for use on traditional sloped roofing surfaces
  • Use on building overhangs, underneath porches, or as a wainscot