7.2 Ultra Box (Produced in MT/CO)
7.2 Ultra Box (Produced in MT/CO)
7.2 Ultra Box Metal Roofing Panels
Panel Color Options
22 Gauge
Almond (CMG)
Bone White (CMG)
Charcoal Gray (CMG)
Core Ten
Dark Bronze (CMG)
Hartford Green (CMG)
Mansard Brown (CMG)
Matte Black (CMG)
Medium Bronze (CMG)
Sandstone (CMG)
Sierra Tan
Slate Gray (CMG)
24 Gauge *Stock Colors*
Charcoal Gray (Teton)
Dark Bronze (Teton)
Gotham Patina Low Gloss/Low Sheen (Teton)
Gun Metal Low Gloss/Low Sheen (Teton)
Matte Black (Teton)
Medium Bronze (Teton)
Galvalume Non-Painted (Teton)
24 Gauge Special Order (takes extra time)
Aged Copper (CMG)
Almond (CMG)
Ash Gray (CMG)
Bone White (CMG)
Bright White (CMG)
Burgundy (CMG)
Burnished Slate (CMG)
Champagne (CMG)
Charcoal Gray (CMG)
Cityscape (CMG)
Classic Green (CMG)
Colonial Red (CMG)
Copper Penny (CMG)
Dark Bronze (CMG)
Deep Black (CMG)
Gun Metal Low Gloss/Low Sheen (Teton)
Hartford Green (CMG)
Hemlock Green (CMG)
Mansard Brown (CMG)
Matte Black (CMG)
Medium Bronze (CMG)
Musket Gray (CMG)
Rame Toscana (Low Gloss/Low Sheen)
Regal Red (CMG)
Royal Blue (CMG)
Sandstone (CMG)
Sierra Tan
Silver Metallic (CMG)
Slate Blue (CMG)
Slate Gray (CMG)
Stone White (CMG)
Teal (CMG)
Terra Cotta (CMG)
Terra Cotta (Drexel)
Vintage (CMG)
Weathered Zinc (CMG)
Western Rust (CMG)
26 Gauge
Almond (CMG)
Ash Gray (CMG)
Beige (Teton)
Bone White (CMG)
Bright White (CMG)
Burgundy (CMG)
Burnished Slate (CMG)
Charcoal Gray (CMG)
Classic Green (CMG)
Colonial Red (CMG)
Copper Penny (CMG)
Dark Bronze (CMG)
Dark Brown (Teton)
Dark Gray (Teton)
Dark Green (Teton)
Dark Ivy (Firestone)
Deep Black (CMG)
Hickory Moss (Teton)
Light Gray (Teton)
Light Stone (Teton)
Mansard Brown (CMG)
Medium Bronze (CMG)
Matte Black (CMG)
Musket Gray (CMG)
Medium Brown (Teton)
Pebble Clay (CMG)
Sierra Tan
Slate Blue (CMG)
Slate Gray (CMG)
Weathered Copper (Teton)
Zincalume (Teton)
Testing
UL 580 Wind Uplift (Class 90)
UL 2218 Class 4 Hail Impact
UL 790 Class A Fire Rating
Fastener Guide
- #10 Woodfast screws are designed for use with dimensional lumber
- #14 Wafer screws are designed for use with plywood sheeting, OSB, and wafer wood (7/16” minimum thickness)
- #12 Tek Screws are designed to be used with structural steel up to 3/16” in thickness
Fastener Application
Screws are to be applied in the middle of every other trough and then on both sides of the rib at each overlap of the panels, installed not more than 5’0” up the panel. At eaves and panel end laps, use a double screw pattern, and fasten into the middle of every trough. On all roofing applications, Mastic Tape must be applied between every panel at the side lap with Stitch Screws installed every 1’0” up the panel.
Screw Patterns
