1.5″ Nail Strip
1.5″ Nail Strip
1.5″ Nail Strip Standing Seam Panels
Nail Strip Standing Seam provides easy installation, very high wind loads and waterproofing, in a wide array of colors and material types, delivering a unique option for homeowners.
This hidden fastener panel is manufactured in 1.5” seam height and it is most readily available in widths of 15 & 16. The width is dependent upon the height of the seam that is spec’d for the job, however, this panel can be made into many different widths if required.
*Certain colors may be subject to an order minimum and longer lead time. Teton Steel recommends obtaining a color chip prior to placing an order. Please contact your Teton Steel representative to learn more.
Panel Color Options
24 Gauge *Stock Colors*
24 Gauge Special Order (takes extra time)
26 Gauge *Stock Colors*
26 Gauge Special Order (takes extra time)
Testing
UL 580 Wind Uplift (Class 90)
UL 1897 Extended Phase Wind Uplift
UL 2218 Class 4
UL 790 Class A Fire Rating
Fastener Application
Roof Application: Fastener Spacing:
12” and 24”, refer to engineering specifications for proper clip spacing and substrate specifications. Standing seam metal roofing can be used in conjunction with exposed fastener trim pieces or trim that is designed to reduce/ eliminate the need of exposed fasteners on the roofing surface. This designation must be made prior to production.
Screen reader support enabled.
Panel Options
Flat Panel or Striations.
Screw Patterns
